LED Stack Light - 24V

The SL60 is a bright, long-lasting, and cost-effective industrial Andon light. These are ideal for use in factories or on industrial machinery. Typical uses are as Automated machinery status lights, operator signal lights, or as lean tower lights.

Each stack light is equipped with an 85dB buzzer and highly visible LED status lights. These Andon lights use the latest LED technology and consume very little power. They can be viewed at long distances to inform operators of machine status or instruct operators to perform a predefined task.

The standard SL60 multilevel stack light can be ordered with several different mounting options. The pedestal option is a simple mounting solution for attaching the status light to most horizontal surfaces.

The pivot mounting option is useful for situations where the stack light needs to be mounted to a vertical surface or if the light needs to be tilted at an angle. These can be specified at the time of ordering or ordered as an accessory to be retrofitted to an existing stack light. This mount has a hole in the backside to make it possible to hide the wire inside of a machine or cabinet. This makes for a cleaner-looking installation.

The SL60-B  version has a simple 90-degree mount. These units come with a longer 14.75" pole. Other lengths are available upon request. 

The standard SL60 Stack light comes with a 6.5" pole. To order your SL60 with a longer or shorter pole, call us to place a special order. We have several lengths to choose from and can even make a pole custom for your application. Your existing SL60 can be retrofitted with a different pole if this is desired. We also sell a smaller version of this stack light that is about 6 inches tall. A variety of options are available in the accessory section of stack-light.com

Stack-Light.com’s goal is to make it simple for you to configure the perfect stack light to fit your application. The SL60 can be configured from a single level high up to five levels high. The colors are White, Blue, Green, Orange, and Red. You can specify if the red light flashes or if the buzzer is activated in the red warning light state. The SL60 stack light can be ordered as a 24V or 120V version. 

Typically these lights are wired into a Machine or used with a PLC. For a simpler solution, we offer Andon Stations that have switches built into them. These come pre-assembled and are plug-and-play. 

Each colored light can be set to flash or not using dip switches that are located on the light's main control board. The buzzer can also be set to pulse or stay steady. We build the lights and set them up to work as ordered prior to shipping them. But if in the future you want to change a light, it is a simple and easy change to make. See the documentation below to learn how to reconfigure your light.

 Flashing- Non-Flashing Light configuration instructions

Click for Printable Version

SL60 Specifications

• 24V AC/DC
• Configurable for your application
• High-intensity LED signal light can be viewed easily at a distance
• White, Blue, Green, Orange, and Red Status Lights
• Built-in Audible Alarm 85 dB
• Long-Lasting LED light
• Durable Construction
• Low Power Consumption
• 60 mm diameter indicator light x 11” - 18.5” tall
• Easy Installation
• IP53 Rated, NEMA 5
• 1-year warranty

 SL60 Spec Sheet