Wireless Status Light Repeater

The RC-R Wireless Stack light repeater is used to extend the range of our wireless lighting system. Our RC lights use a mesh network which makes the system more robust. They can easily work within 150 feet of each other and under moist conditions can work further. In some cases, there can be walls or equipment that interfere with the wireless signal. Adding an RC-R signal repeater will extend the reach of the lights and remote controls.

The Stack Light Wireless system uses a Mesh network to extend the signal of the devices and to make it more robust. Each device works as a repeater and messages are passed from device to device. Unlike some wireless systems, our system does not use a hub. Every device can continue to work if one device stops working. In a hub system if the hub stops working the entire network goes down.

Stack-Light.com carries a  wide selection of wireless status lights and controls that can be configured to fit your particular application. 

The RCSL60 Remote controllable signal lights can be configured to have from one to five lights. They have a built-in buzzer that can be enabled. These status lights are powered by a standard 110V outlet. You can build a system that includes multiple RCSL60 lights that can be controlled remotely using single or multiple controllers. 

RCSL60 Remote Controlled Stack Light

For applications where controls need to be built into the wireless lights, we offer the RCL60C version of the status lights. This version makes it possible to control the light that it is attached to and other wireless lights in the system. One advantage of this version is that it can eliminate the need for an additional independent remote control. 

RCSL60C Wireless Stack Light with Built-in Control

 We offer two different versions of our wireless stack light controls. The RC-M version is powered by a 110V and the RC-B version uses two AAA batteries. Both units can be mixed and matched with any of the wireless status lights or controllers in our RC lineup. 

The RC-M control has lighted buttons that correspond with the stack light that it operates. The lighted buttons are lit or not lit to correspond to the condition of the wireless light that it controls. This gives this remote control the advantage of acting as an additional status light. 

RC-M Remote Stack Light Controller

The RC-B remote control is battery-powered. It still has the same long range as the 110V version but is smaller and can be portable. To conserve power, the control buttons on the RC-B version do not lite up. This unit will control any of the RC wireless stack lights and controls in our lineup. 

RC-B Wireless Stack Light Control

Stack-Light.com's Wireless Tower Lights can be configured specifically for your application. The lights and controls can be combined to build a unique system. Let us help with your project. We are standing by. Call now.