
Part #
SL60USB - USB Andon Light
This USB Activated Stack Light, the SL60USB, is a convenient and effective way to inform a team when a job is complete or to indicate when a process is in need of attention. This efficient device is small and robust. With its bright LED light, you can be sure to have a visual signal when it matters most.
The SL60USB Stack Light can be activated using a computer. These lights can be ordered in one, two, and three-level versions. They all include a buzzer. These are commonly used on cash registers or machinery that uses a PC rather than a PLC.
Downloads:
Programming Instructions for USB Sack Light
USB Stack Light Serial Communications
- Insert the USB cable of the stack light into the USB port of the PC
- Open the Control Panel and navigate to Hardware and Sound
- Click Device Manager under the Devices and Printers section
- Maximize the Ports section and find the USB Serial Port name for your device
- Configure your comm utility as follows:
Parameter |
Value |
Comm port name |
The name from Step 4 above |
Baud rate |
9600 |
Parity |
None |
Data bits |
8 |
Stop bits |
1 |
- The following table shows commands and their functions. Send each byte consecutively, the first byte listed first.
Function |
Hex Bytes to Send |
Red on |
0xA0, 0x01, 0x01, 0xA2 |
Red off |
0xA0, 0x01, 0x00, 0xA1 |
Green on |
0xA0, 0x02, 0x01, 0xA3 |
Green off |
0xA0, 0x02, 0x00, 0xA2 |
Yellow on |
0xA0, 0x03, 0x01, 0xA4 |
Yellow off |
0xA0, 0x03, 0x00, 0xA3 |
Buzzer on |
0xA0, 0x04, 0x01, 0xA5 |
Buzzer off |
0xA0, 0x04, 0x00, 0xA4 |
Stack-Light.com is here to help with your industrial lighting needs. We offer a large variety of Stack Lights, Tower Lights, and Andon Stations. We can also build a lighting system for your unique application. Call and let us help with your application.